Embedded Files
The Knowledge Base has moved! Please click this banner to go to the updated Knowledge Base.
In order to access the RUSD-NET network, a valid wireless authentication certificate MUST be installed on your device .
In order to access the RUSD-NET network, a valid wireless authentication certificate MUST be installed on your device .
These instructions are only valid for joining the RUSD-NET network.
These instructions are only valid for joining the RUSD-NET network.
RUSDlearns is not affected. You will only need to do this procedure once per device.
RUSDlearns is not affected. You will only need to do this procedure once per device.
Installing the new Wireless Authentication Certificate onto an Android Device
Installing the new Wireless Authentication Certificate onto an Android Device
1. Select RUSD-NET from the available wireless networks
2. Enter your Active Directory Username (username you use to login to your district computer & email) in the “Identity Field” (not the anonymous identity field)
3. Enter your Active Directory Password (password you use to login to your district computer & email) in the password field and click Connect
You will now be connected to RUSD-NET (if you cancel the acceptance, you will not be allowed on the network)
Installing the new Wireless Authentication Certificate onto an iPhone
Installing the new Wireless Authentication Certificate onto an iPhone
1. Select RUSD-NET from the available wireless networks
2. Enter your credentials when prompted (username & password you use to login to your district email)
1. You will then be prompted to accept and trust a certificate from ISE-A.rusd.edu
2. Click Trust in the upper right hand corner.
You will now be connected to RUSD-NET (if you cancel the acceptance, you will not be allowed on the network)
Installing the new Wireless Authentication Certificate onto a Mac
Installing the new Wireless Authentication Certificate onto a Mac
1. Select RUSD-NET from the available wireless networks
2. Enter your credentials when prompted (username & password you use to login to your district email)
3. You will then be prompted to accept and trust a certificate from ISE-A.rusd.edu
4. Click the checkbox to “Always trust ISE-A.rusd.edu”
5. Ensure that when the Trust field is expanded below “Always Trust” is displayed
6. Enter your Mac Admin password to write this certificate to your Keychain
You will now be connected to RUSD-NET (if you cancel the acceptance, you will not be allowed on the network)
If you have any questions or concerns, please call the help desk at x81099 .
If you have any questions or concerns, please call the help desk at x81099 .
Page updated
Report abuse